Home > Products > Anthem STR Power Amplifier

£5499.00

STR Power Amplifier

The STR Power Amplifier is the beating heart of a world-class 2-channel sound system.

It delivers massive power generation, with audiophile-quality output in a smartly designed component.

Designed, engineered, and Crafted in Canada, the STR Power Amplifier delivers 400 Watts/channel into 8 ohms with both channels driven, a massive 600 Watts/channel into 4 ohms (both channels driven) and 800W in 2 ohms, for true no-holds-barred performance.

Inside, the STR Power Amplifier uses two colossal transformers and multiple high-current output devices so the most subtle details and dynamic peaks are handled equally well.

Outside, its beautifully designed cosmetics, including a 7-inch graphic control display and secure, highly conductive audiophile connectors provide a perfect match to the STR Preamplifier.

  • 400W/600W/800W into 8/4/2 ohms
  • Cascoded complementary feedback input stage
  • Sixteen bipolar output devices per channel
  • Dual Mono Design
  • Massive toroidal transformers
  • Soft turn-on
  • Four power on/off options
  • No rail fuses
  • Advanced Load Monitoring™ Technology
  • Graphic front panel display for the power meter, status, and easy setup navigation
  • Available in Silver and Black Finishes
  • Crafted in Canada

Massive Power

Cascoded Complementary Feedback Input Stage

The STR Power Amplifier benefits from Anthem’s proprietary input topology—a unique departure from the classic differential input stage.

Eight low-noise bipolar input devices are configured in a complementary active-load cascoded feedback arrangement for reduced distortion, exceptionally linear response and superior bandwidth.

Transistors in critical stages are hand-selected and matched for lowest possible distortion.

Sixteen Bipolar Output Devices Per Channel

Anthem engineers incorporated sixteen bipolar output devices per channel, resulting in peak production that is effortless and instantaneous, cinching even the most challenging material.

The use of multiple bipolar output devices in class AB configuration also dramatically reduces distortion while ensuring extreme linearity, extensive bandwidth, and stress-free reliability.

Experience the immense dynamics of up to 800 clean watts delivered into demanding 2-ohm loads, or 400W into 8 ohms/600W into 4 ohms continuously and with both channels driven.

Massive Toroidal Transformers

Conservatively rated, in a low-profile design shaped to minimise hum, the low-impedance toroidal power transformers — one for each channel — make no sacrifices when it comes to delivering a continuous supply of pure, clean, low noise power.

As well, both the power supply impedance and internal cabling inductance are minimised to deliver a clear path for maximum power.

The amplifier channels are thus able to deliver stable, continuous power at maximum output without affecting one another, even when driving the lowest impedances.

While some amplifiers oscillate or run out of power when driving lower impedance loads, the STR Power Amplifier remains perfectly stable under all conditions.

Soft Turn-On

A sequence-controlled soft turn-on significantly reduces power line transients and in-rush current during start up, thereby preventing accidental tripping of circuit breakers.

No Rail Fuses

The amplifier sections are Direct Connected to the power supply capacitor bank. This keeps output impedance remarkably low while making more power available to the amplifier.

Even when driving lower or complex impedance loads, the result is audibly superior performance.

Power On/Off Options

In addition to the traditional options for power-on, the STR Power Amplifier allows trigger mode and audio signal sensing to be combined so you would never need to think about turning the amplifier on or off manually.

This can be useful when using a preamp with Home Theater Bypass mode together with a surround sound processor in the same system.

The Crafted in Canada Difference

The STR Power Amplifier is designed, engineered and manufactured in Canada and is part of premium STR Series by Anthem, the leader in audio power and control.

Advanced Load Monitoring™ Technology

Exclusive ALM™ technology monitors internal temperature, current and voltage to ensure safe and uninterrupted long-term operation. ALM is not in the signal path, so it never gets in the way. Instead, ALM engages instantly, but only in the most extreme circumstances, to protect your amplifier and speakers from damage, while lowering the chance of a line fuse blowing during an over-current condition. The front panel display confirms status at all times.

STR Power Amplifier Specifications

Impedance
Power Output (per channel)
(Continuous, 20 Hz – 20 kHz, <1% THD)
400 W 600 W 800 W*

* Maximum 3 seconds due to high current draw.

Bandwidth (-3 dB at 400 W into 8 ohms) 91 kHzSlew Rate30 V/μsDamping Factor (20 Hz – 1 kHz)360Channel

Separation101 dB (100 Hz), 98 dB (10 kHz)

Input Impedance10kΩ (RCA), 15kΩ (XLR)

Input Sensitivity (for 400W into 8Ω)2.1 VrmsVoltage Gain29 dB

POWER CONSUMPTION – Standby 310 mW – Idle 65 W – Typical Playback Levels 150 W – 300 – W-High Playback Levels 600 W – 1100 W

DIMENSIONS – Height 17.2 cm – Width 43.2 cm – Depth 47 cm

Weight (unpacked)60 lb (27.3 kg)

Available to order in Black or Silver