IsoAcoustics GAIA Neo Series
Experience improved sonic clarity with GAIA Neo Series speaker isolation feet.
GAIA Neo: elevating audio isolation
The GAIA Neo series is the next evolution in IsoAcoustics’ award-winning line of speaker isolation feet.
Building on the proven legacy of the original GAIA models, GAIA Neo introduces a series of advanced upgrades including seamless height adjustment, improved isolation performance, simplified installation, and a sleek modern aesthetic in black or dark chrome.
Designed to replace factory-installed feet or spikes, the GAIA Neo decouples the speaker from the supporting surface to eliminate distortion caused by vibrations and reflections.
With GAIA Neo, unlocking the full potential of your audio system is easier than ever before.
Patented technology. Proven performance.
The GAIA Neo series builds on IsoAcoustics’ patented isolation technology with refinements that take performance even further.
The GAIA Neo isolators offer increased isolation effectiveness, reducing internal reflections and mechanical vibrations with greater precision.
The GAIA Neo isolator is directional and designed to be aligned with the speaker’s drivers, helping to resist lateral movement and oscillations while maintaining accurate alignment with the listening position.
By decoupling the speaker from its supporting surface, GAIA Neo reveals greater clarity, finer detail, and a more transparent soundstage with enhanced depth and realism.
Height adjustment
The isolator can be raised or lowered by up to 8.5mm (0.34″) without affecting its on-axis alignment. Simply rotate the lower ring to adjust.
Simplified installation
The top of the isolator housing sits flush against the bottom of the speaker, with an integrated o-ring that compresses for a secure fit.
Enhanced isolation
The Neo continues to build on IsoAcoustics’ industry leading technology, providing even greater isolation and sonic clarity.
Available in dark chrome or black
Two exquisite finish options: the deep, reflective sheen of dark chrome, or the timeless, confident presence of black.
Stable contact on uneven floors
Floors are often not perfectly level, and traditional rigid feet can struggle to sit flat.
The GAIA Neo uses a bottom isolator that can pivot to maintain full contact with the floor even when the surface is slightly angled.
This allows the speaker to remain stable and ensures consistent performance without rocking or compromised support.
Effortless positioning with Floor Sliders
Floor Sliders are the perfect companion for your GAIA Neo isolators, allowing you to easily reposition your speakers or audio equipment after installation.
Designed to work directly on carpeted flooring, the sliders can also be used on hard surfaces by applying the included adhesive felt pads.
This dual-surface flexibility ensures smooth movement whether you’re setting up on carpet or solid floors.
Simply slide the speakers into place, then tilt one side at a time to remove the sliders once the final position is set.
Superior isolation by design
With some isolation feet, the metal housing rests directly on the floor, creating a rigid path for vibrations to travel regardless of what is inside.
The GAIA Neo is different.
Only the lower isolator makes contact with the surface, so vibrations are not transmitted through the housing.
This design provides a controlled path for energy to dissipate, resulting in greater clarity, openness, and focus.
Gaia 1 Neo
For floor standing speakers and subwoofers weighing 220 lbs (100KG) or less.
Size
3.0” / 77mm (W) x 2.0” / 52mm (H)
Height Adjustment
0.34” (8.5mm)
Thread
M12-1.25, M8-1.25 and ¼”-20
Gaia II Neo
For floor standing speakers and subwoofers weighing 121 lbs (55KG) or less.
Size
2.6” / 65 mm (W) x 2.0” / 50 mm (H)
Height Adjustment
0.34” (8.5mm)
Thread
M8-1.25, M6-1.0 and ¼”-20
Gaia III Neo
For floor standing speakers and subwoofers weighing 70 lbs (32KG) or less.
Size
2.2” / 56mm (W) x 1.8” / 45mm (H)
Height Adjustment
0.34” (8.5mm)
Thread
M8-1.25, M6-1.0 and ¼”-20
Gaia- Titan Cronos Neo
For floor standing speakers and subwoofers weighing 620 lbs (281KG) or less.
Size
4.2” / 106mm (W) x 2.5” / 64mm (H)
Height Adjustment
0.34” (8.5mm)
Thread
½-13, M10-1.5 and M14-2.0
GAIA-TITAN Rhea Neo
For floor standing speakers and subwoofers weighing 420 lbs (190KG) or less.
Size
3.7” / 94 mm (W) x 2.4” / 60 mm (H)
Height Adjustment
0.34” (8.5mm)
Thread
½”-13, M8-1.25, M14-2.0
GAIA-TITAN Theis Neo
For floor standing speakers and subwoofers weighing 320 lbs (145KG) or less.
Size
3.4” / 86mm (W) x 2.2” / 56mm (H)
Height Adjustment
0.34” (8.5mm)
Thread
½”-13, M8-1.25, M14-2.0
Carpet disks for solid contact
Your GAIA or GAIA-TITAN isolators can achieve even greater stability on thicker carpets with the addition of our new carpet discs.
Made from solid stainless steel, these optional accessories provide a more robust interface, minimising any potential for sinking and ensuring optimal isolation for enhanced audio performance.
Gaia Neo Series Questions and answers
Can the height be adjusted while the Neos are loaded with weight?
Yes, the height can be adjusted while the GAIA Neo isolators are under load. However, we recommend gently tilting the speaker to relieve some of the weight. This isn’t necessary to protect the isolators, but it makes it easier to rotate the lower ring for height adjustment.
Do the GAIA Neo use the same thread adapters as the GAIA series?
No, the GAIA threads are not compatible with the GAIA Neo.
Do the GAIA Neo and GAIA-TITAN Neo models use the same thread adapters?
Yes, all the GAIA Neo and GAIA-TITAN Neo isolators use the same thread adapters.
How has the isolation been improved from the GAIA Neo vs the previous GAIAs?
The GAIA Neo builds on the same patented isolation design as the original GAIA series but incorporates refined internal isolators with adjustments to shape, thickness, and durometer.
These changes are the result of continued R&D and performance testing.
These enhancements deliver improvements in clarity, focus, and low-frequency definition, while the original GAIA models continue to offer excellent performance and remain part of our lineup.
My speakers don’t have threaded feet, can I still use them on the GAIA Neos?
No, the GAIA Neo requires a connection with a threaded insert.
Threaded inserts are available at most hardware stores and can be installed in the base of many types of speakers, but this is not typically recommended because of the risk of damaging the speaker.
When will the GAIA Neo be available?
The GAIA Neo is expected to be available in Q3 2025. The GAIA-TITAN Neo will be available a few months later.
Do the GAIA and GAIA Neo use the same carpet disks?
Each model of GAIA Neo and GAIA-TITAN Neo isolators will have carpet disks.
The GAIA Neo isolators are a different size from the GAIA Carpet disks, and they have a black finish.
Is the IsoAcoustics Logo applied on both sides of the GAIA Neo and GAIA-TITAN Neo?
Yes, the logo is applied on both sides to make it easier to align the isolators correctly during installation.
The O-Ring will compress and allow for aligning the isolators with a strong connection.
How is GAIA Neo different from the original GAIA models?
GAIA Neo builds on the original GAIA design with:
- Seamless height adjustment using a rotating lower ring.
- An improved flush-fit design with integrated O-ring (no lock nuts).
- Easier installation.
- Floor-Sliders for simple speaker positioning.
- Available in black and dark chrome finishes
Do I keep the floor sliders underneath the GAIA Neo permanently?
The floor sliders make it easy to adjust the position of the speakers, but we recommend removing the floor sliders once the speakers are in their final position.
You may choose to keep your floor sliders in place if you move your speakers frequently, but we recommend removing the floor sliders if your speakers always remain in the same position.
How much height adjustment does each GAIA Neo isolator provide?
- Each GAIA Neo and GAIA-TITAN Neo model provides 0.33” (8.5mm) of height adjustment.
Which GAIA Neo model will perform best for my speakers?
The GAIA model should be selected based on the weight that they are supporting.
The weight limits we set are based on the performance curve.
The GAIA perform well up to the specified weight limits, but once you are within 10% of the weight limit, we recommend using the next size up for best results.
We do not recommend exceeding the weight limits of the GAIA’s or GAIA-TITAN’s.
How is the GAIA Neo Series installed?
- Install the Threaded Adapter – Choose the correct threaded adapter for your speaker or component and thread it into the bottom of the speaker or component.
- Attach the GAIA Neo Isolators – Screw each GAIA Neo isolator onto the installed adapter until it sits firmly against the bottom of the speaker. Align the IsoAcoustics logo to face forward, in line with the front of the speaker.
- Prepare the Floor Sliders – Place the included floor sliders under each GAIA Neo isolator.
- On solid floors: apply the adhesive felt pads to the bottom of the sliders.
- On carpeted floors: use the sliders without felt pads.
- Position the Speaker – carefully slide the speaker into position using the floor sliders.
- Level and Adjust – Rotate the lower ring on each GAIA Neo to fine-tune the height. This allows you to level the speaker, adjust the focus, and ensure even weight distribution across the isolators.
- Listen and Fine-Tune Placement – After initial setup, listen to the system and make any needed adjustments to the speaker’s position or isolator height. Once satisfied, tilt the speaker one side at a time to remove the floor sliders.
What makes the GAIA and GAIA Neo series different from all of the other series of IsoAcoustics products?
The GAIA and GAIA Neo series are installed by threading into the base of speakers or components.
The Advantage of this strong connection with the speaker or component is that all of the energy is managed by the internal isolators.
This has a slight advantage compared to our other products which grip the bottom of the speaker by the isolators.
How can I move the position of my speakers after the GAIA Neo Isolators have been installed?
- Place the included floor sliders under each GAIA Neo isolator.
- On solid floors: apply the adhesive felt pads to the bottom of the sliders.
- On carpeted floors: use the sliders without felt pads.
- Position the Speaker – carefully slide the speaker into position using the floor sliders. Once they are in their final position, tilt the speaker one side at a time to remove the floor sliders.
The weight of my speaker is slightly above the maximum weight. Will the GAIA Neo still perform?
We do not recommend exceeding the specified weight limit.
The weight limits are set based on the performance curve, not based on how much weight they can support.
The performance of the GAIA Neo is still strong at the weight limit, but is quickly declining above this weight.
How do I determine what the thread size is for my speaker?
Please click here for information on thread sizes and instructions on how to determine the thread size for your speaker or subwoofer
What thread sizes are available for the GAIA Neo?
Each model of GAIA Neo Isolator comes with 3 common thread sizes.
If none of these meet your needs, we will be able to order specific ones for you.
- GAIA III Neo – M6-1.0, M8-1.25, ¼”-20
- GAIA II Neo – M6-1.0, M8-1.25, ¼”-20
- GAIA I Neo – M8-1.25, M12-1.25, ¼”-20
- Theis Neo – M8-1.25, M14-2.0, ½”-13
- Rhea Neo – M8-1.25, M14-2.0, ½”-13
- Cronos Neo – M10-1.5, M14-2.0, ½”-13
Click here for more information on thread sizes and instructions on how to determine the thread size for your speaker or subwoofer.
Can the GAIA Series be used on stand mounted speakers?
If the speakers are fastened to the stands, then they tend to act as one and the GAIA Neo series are recommended for installation on the floor stand.
If the speakers are resting on top of the stands, then we recommend isolation between the speaker and the stand. The OREA series are a great option in this case.
