ProAc K1

ProAc K1

£6,925.00 – £7,965.00

The premium ProAc range the ‘K series has now been in production for the last 12 years. With this success ProAc have been asked for a stand mounted K series speaker which we are proud to now offer.

Add to wishlist
SKU: ProAcK1 Categories: , Tags: , ,

ProAc K1

Available in store only

The premium ProAc range the ‘K series has now been in production for the last 12 years.

K1

The K3, K6, K8 and most recently the K6 Sig have proven to have been very popular choices for people looking for the ultimate in sound reproduction.

With this success ProAc have been asked for a stand mounted K series speaker which we are proud to now offer.

The K1 is a special stand mounted version using the Kevlar cone as in the K range and the tweeter is also their proven ribbon unit.

Certain modifications have been made to the Cabinet, bass driver and tweeter to make it adaptable for them to be able to develop this to be suitable for a stand mounted loudspeaker.

Although the K1 is a stand mounted loudspeaker is has a surprisingly extended and accurate bass response with the usual beautiful midrange from the K series bass driver used within the K series.

K1 top view

The unique K design which has been incorporated into the K1 sees a cabinet which is bottom ported and a specially designed dedicated stand to complement and bring out the best in the K1, the K1 stand is available separately from the loudspeakers.

The K1 considering its size gives an impressive sound stage for a stand mounted loudspeaker with an almost electrostatic open midrange and very accurate bass.

You just have to try these speakers

K1 Specifications

Nominal Impedance
8 ohms

Recommended Amplifiers
10 to 150 watts

Frequency Response
28Hz-30kHz

Sensitivity
90 dB linear for 1 watt at 1 metre

Bass/Midrange
Bass and midrange frequencies are both covered by a single 6.5″ (165mm) Kevlar coned unit, the Kevlar cone covers all frequencies up to 3Khz and slightly above.

Tweeter
The ProAc ribbon tweeter has a ribbon lighter than a human hair with rear chamber damping and alnico magnet.

Crossover
Finest components on dedicated dual layer circuit board. ProAc Multistrand oxygen free copper cable throughout. Split for optional Bi wiring or Bi amplification

Dimensions
Height: 22.4 inches Width: 10.4 inches Depth: 15.8 inches

Mode
Stand mounting (Dedicated K1 stand available separately)

Grille
Acoustically transparent crimplene

Finishes

ProAc Finishes
Standard Finishes:

Black Ash, Mahogany, Cherry, Natural Oak, Silk White and Walnut.

Premium Finishes:

Rosewood, Ebony NEW Tamo Ash, Dark Eucalyptus

Dedicated K1 stand available at £995.00

K1 stands

Additional information

Colour

Black Ash, Cherry, Ebony, Eucalyptus, Mahogany, Natural Oak, Rosewood, Silk White, Tamo Ash, Walnut

Brand

ProAc Loudspeakers

Even in the short history of high-end high fidelity, few companies have lasted the course. Even fewer have consistently developed and produced high quality products which have earned international acclaim. ProAc is one such company. The ProAc range is, as they say, reassuringly expensive. We do not make cheap loudspeakers and certainly do not produce cheap sounds. Happily, many thousands of audiophiles worldwide agree with our philosophy. Every ProAc loudspeaker is hand-crafted, with our technicians individually responsible for the building and testing of each unit, from the flagship Response models to the diminutive Tablette. Build quality alone is unsurpassed, each cabinet being meticulously constructed, damped and finished in real wood veneer. Only the very finest components are used in ProAc loudspeakers, with each new model reflecting the very leading edge of audio technology. Indeed many models now incorporate dedicated drive units using our own basket, cone and magnet assemblies. Drive unit performance is fine-tuned through expensive and sophisticated crossover networks. But all the finest cabinets and components in the world are redundant without inspired design. And for a quarter of a century Stewart Tyler, Chairman and Chief Designer has been responsible for putting it all together and producing the performance. He alone decides the cabinet size and configuration, drive unit layout and crossover design and all the other factors which combine to produce some of the most cultured sounds available in modern audio. ProAc loudspeakers are available through a network of enlightened dealers who will be pleased not only to put our models through their paces, but to give informed advice on partnering equipment. When you think you've heard the best, then go and hear ProAc.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…