Magico A3
The inspiration for the new Magico A3 was driven by the engineering challenge to create not only a full range loudspeaker that incorporates similar design philosophies found in higher-end Magico offerings but to provide an entry level category that is accessible to a new and wider audience of music enthusiasts.
The A3 enclosure is formed with machined 6061 T6 aircraft grade aluminum and includes a complex internal bracing structure that increases the stiffness and mass of the enclosure while minimising overall resonance.
A calibrated sub-enclosure provides an optimized environment for the mid-range driver to operate within and without any interaction from the back wave pressure of the bass drivers.
The black brushed aluminum enclosure is lustrous and stands firmly on a 4-point spiked outrigger base which provides perfect coupling to the floor for enhanced dynamic range.
Extended high frequencies are provided by a newly designed Magico pure beryllium-diaphragm with an optimised 28-mm dome surface that is based on the fundamental design platform of the M-Project tweeter.
A customised neodymium motor system is encased in an improved back chamber with new damping materials which provide ultra-low distortion, higher power handling, massive dynamic capabilities and extended linear voice coil movement.
A newly designed Magico 6-inch mid-range driver sets a new benchmark of measured performance in both frequency bandwidth and time domains.
The cone material is formulated using Multi-Wall carbon fiber and a layer of XG Nanographene, which provides optimal stiffness to weight ratio with ideal damping properties.
A new overhung neodymium based motor system incorporates extra-large magnets to ensure a stabilised magnetic field in the 75-mm pure titanium voice coil.
All four drivers in the Magico A3 are tested and optimised for acoustical, mechanical, electromagnetic, and thermal behaviors using the latest state-of-the-art Finite Element Analysis simulation testing equipment.
Acoustically integrated using Magico’s exclusive Elliptical Symmetry Crossover topology that utilises state-of-the-art components from Mundorf of Germany.
The 3-way dividing network features a 24db per octave Linkwitz-Riley filter that maximizes frequency bandwidth while preserving phase linearity and minimising intermodulation distortion.
Grilles are optional at £850.00
Specifications Magico A3
SPECIFICATIONS
Driver Complement:
1 X 1.1” (2.79cm) Beryllium Dome Tweeter
1 X 6” (15.24cm) Graphene Nano-Tec Midrange
2 X 7” (17.78cm) Graphene Nano-Tec Bass
Sensitivity: 88dB
Impedance: 4 Ohms
Frequency Response:
26 Hz – 50 KHz
Recommended Power:
50 watt RMS (min) / 300 watts (max)
Dimensions:
44”H x 11”D x 9.25”W (112cm x 27cm x 23cm)
Weight: 110 lbs. (49.89 kg)
