Naim Audio Super Lumina interconnect cables

£1,645.00£3,595.00

Naim Audio’s Reference cable. Super Lumina interconnects by Naim Audio are designed to minimise the effect of external and internal interference sources and preserve maximum signal fidelity.

Naim Audio Super Lumina interconnect cables

Naim Audio’s Reference cable. Super Lumina interconnects by Naim Audio are designed to minimise the effect of external and internal interference sources and preserve maximum signal fidelity.

The fundamental cable design consists of several individually-insulated multi-strand silver-plated copper conductors of varying diameters enclosed in a tin-plated copper shield. This is all enclosed in a soft outer jacket which facilitates easy installation whilst minimising microphonic interference.

Each signal, return, ground and shield conductor is individually manufactured for its specific function. The ground conductor references the audio band waveform, mirroring the internal design of Naim electronics.

To optimise performance and ensure consistency the directionality of the cables is controlled at every point of manufacture. Each diameter wire is matched after extrusion so that every conductor within the cable has the same directionality.

The Naim Air-PLUG

The Super Lumina interconnects feature an advanced version of Naim’s patented Air-PLUG technology first introduced for the Hi-Line.

All DIN and XLR connectors use the Air-PLUG connector which is designed as a decoupling device to minimise microphonic interference and preserve the integrity of the audio signal.

The new Super Lumina Air-PLUG features multiple individual aluminium rings which form the rear of the connector. These are screwed together to form an articulating section which inhibits the passage of unwanted energy, the choice of aluminium as a material enhances this process. The connector pins on DIN terminated cables also float within their sockets, extending the decoupling effect right to the point where the signal enters the product.

Hand-built in Salisbury
Each Super Lumina cable is hand-assembled at Naim in Salisbury to the customer’s specification of length and termination. The process is intricate and highly-skilled, following detailed instructions which cover every aspect of the build.

Cable de-stressing

Every cable also goes through a proprietary de-stressing process to relieve the materials of the inherent stresses which are a result of the manufacturing process. This means the cables reach optimum performance with minimal run in time.

Brand

Naim Audio

Naim Audio

Their story begins with one man’s passion for music and weaves its way through four decades and a raft of iconic product launches to the present day.

Naim Audio founder Julian Vereker MBE (1945-2000) was a racing car driver, entrepreneur and self-taught engineer with a deep passion for music.

Spending his spare time listening to and recording his friends playing live in the 1960s, Julian found that playback on his system at home fell woefully short of the experience he craved.

Not content with second best he decided to design his own amplifiers and loudspeakers, ignoring accepted wisdom and focusing on aspects of performance that made music burst to life.

These first designs laid the foundations for a range of iconic and award-winning hi-fi products that would reach well into the next century.

1972 A first start at Capital Radio

Julian won a contract to supply then start-up radio station, Capital Radio, with audio equipment.

The successful design was a compact version of an early Naim Audio power amplifier combined with speaker drive units in one cabinet – the NAM 502

1973 Naim Audio Officially Founded

Following the success of Capital Radio, Naim Audio was officially incorporated in 1973 with Julian Vereker and his co-founder Shirley Clarke as directors. Based in a shop in the centre of Salisbury, our first HQ had both manufacturing and demonstration facilities.

1973 The NAP 200 Power Amplifier

Naim Audio’s first consumer product for home use was launched in the year of our founding: the NAP 200 power amplifier. Originally designed in 1971, its descendant’s power amplifiers differ greatly technologically but still aim for the same performance goals of pace, rhythm and timing

1974 The NAC 12 Preamplifier

With a network of dedicated independent retailers now on board in the UK, the NAC 12, our first production preamplifier, was launched.

1980 Classic Advertising

As Naim Audio grew in popularity through the 70s and early 80s, the team decided to grab the attention of the press and public with a series of tongue-in-cheek adverts. They reflected the confident, often unorthodox nature of our approach to music playback and have become iconic in their own right.

1983 NAIT Integrated Amplifier

Naim Audio’s first integrated amplifier the NAIT introduced. This iconic little integrated amp sounded quite unlike any other integrated of its day and set a trend for so-called ‘super integrateds

1985 The Queen’s Award

Naim Audio is recognised with the prestigious Queen’s Award for the first time in 1985. We would go on to repeat this achievement a further two times in the 21st century, winning for Export in 2010 and for Innovation in digital music streaming in 2014.

1991 The CDS CD Player

Like so many Naim Audio products, the design of our first CD player, the CDS, flew in the face of conventional wisdom. Its Two-box configuration gave the power supply its own separate enclosure and the CD clamp used a rare earth magnet to keep its mass low whilst still firmly holding the disc without vibration

2000 NAP 500 Power Amplifier

The year 2000 marked a step change in Naim Audio history. After several years in development, the new flagship Naim Audio NAP 500 power amplifier was born and with it the new industrial design aesthetic that would redefine Naim Audio for the 21st century. Its music-making ability would only be bettered by the arrival of Statement in 2014.

Additional information

Version

4 Pin DIN to Mono XLR, 4 Pin Din to Stereo XLR, 4 Pin DIN to XLR Pair, 5 Pin DIN to RCA, 5 to 5 Pin DIN, Active 4 to 4 Pin DIN, Balanced XLR to XLR, RCA to 5 Pin DIN, RCA to RCA

Length

1.5m, 1m, 2.5m, 2m

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…