ProAc Tablette 10


10th version of the Legendary ProAc Tablette series

ProAc Tablette 10

The ProAc Tablette 10 joins the highly successful Tablette range.

It is the 10th version of the Tablette since its inception in 1979 and features a thin wall heavily damped infinite baffle enclosure as utilised in the classic BBC LS3/5A.

This design allows the Tablette 10 to be positioned against the wall, unlike a ported enclosure (not recommended).

The new Tablette 10 has cutting edge new drive units, the bass driver has a Paginna Mika cone which is reed leaves mixed with Mika and coated with an acoustic dope.


ProAc Tablette 10 Crossover

The crossover has been specially designed for a sealed enclosure with a network which shapes the response to give a rich bass and an extremely transparent midrange.

ProAc Tablette 10 Silk Dome Tweeter

The tweeter is their well known 1 inch silk dome used in many of ProAc’s other models.

During the design several speakers were used as comparison those being the LS3/5a, ProAc D2, Spender BC1 and Quad Esl 57.

ProAc Tablette 10 Specification 


Nominal Impedance: 10 ohms

Recommended Amps: 5-50 watts

Sensitivity: 86dB linear (1W @1m)


Bass Driver: ProAc 5″

Cone: Paganni Mika with acoustic coat

Acoustic transparent crimplene grille


Finest components throughout

On: Dedicated circuit board

Cable: Multistrand oxygen free copper

Bi Wiring/Amplification: Optional


Dimensions (HWD) 304.8 x 190.5 x 158.75mm

Mode: Stand/Shelf mounting


Additional information


Black Ash, Cherry, Ebony, Mahogany, Natural Oak, Rosewood, Silk White, Walnut


ProAc Loudspeakers

Even in the short history of high-end high fidelity, few companies have lasted the course. Even fewer have consistently developed and produced high quality products which have earned international acclaim. ProAc is one such company. The ProAc range is, as they say, reassuringly expensive. We do not make cheap loudspeakers and certainly do not produce cheap sounds. Happily, many thousands of audiophiles worldwide agree with our philosophy. Every ProAc loudspeaker is hand-crafted, with our technicians individually responsible for the building and testing of each unit, from the flagship Response models to the diminutive Tablette. Build quality alone is unsurpassed, each cabinet being meticulously constructed, damped and finished in real wood veneer. Only the very finest components are used in ProAc loudspeakers, with each new model reflecting the very leading edge of audio technology. Indeed many models now incorporate dedicated drive units using our own basket, cone and magnet assemblies. Drive unit performance is fine-tuned through expensive and sophisticated crossover networks. But all the finest cabinets and components in the world are redundant without inspired design. And for a quarter of a century Stewart Tyler, Chairman and Chief Designer has been responsible for putting it all together and producing the performance. He alone decides the cabinet size and configuration, drive unit layout and crossover design and all the other factors which combine to produce some of the most cultured sounds available in modern audio. ProAc loudspeakers are available through a network of enlightened dealers who will be pleased not only to put our models through their paces, but to give informed advice on partnering equipment. When you think you've heard the best, then go and hear ProAc.


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…