REL S/812
S/812 takes REL’s medium chassis concept to reference-like levels of performance and does so with style, beauty and devastating power.
It delivers incredible levels of all ‘round performance for both music and film sound, gives customers a taste of what our reference models offer, and does so at a fraction of the cost.
Shattering Performance Barriers
For the REL S/812, every aspect of the previous generation’s inner workings were examined without regard to its critical and customer-driven success.
REL turned a fresh eye to power requirements, driver improvements, and specialty filters, upgrading each to extract all the extra performance possible.
All this alongside the cabinet refinements necessary for those upgrades to emerge cleanly.
This latest S range is a triumphant development that has exceeded every expectation of their design team.
REL’s requirements were for far stronger deep bass output between 19-35 Hz, vastly improved theatre dynamics, and an even more open and spacious sound-field which benefits both music and film.
They turned to their NextGen5 amplifier, tuned to 800 watts, with huge reserves of power beyond this, added a light film of carbon fibre to the rear of the driver to handle the extra power, and developed two new sets of custom filters to extract the utmost in brute force and spaciousness.
Finally, REL imbued 812 with the ability to be stacked in 4- or 6-unit line arrays, just like their reference models.
Pure Carbon Fibre Backing
REL S/812 required upgrades to its ContinuousCast™ Alloy Cone to allow it to survive the massive power upgrades.
To permit its thin, aluminium cone to survive 800 watts and incredibly long stroke, REL added an ultra-lightweight backing of pure carbon fibre, strategically placed over portions of the rear surface of the cone.
This produces two benefits; it strengthens and stiffens the cone and also eliminates reversion, wherein the back-wave inside the cabinet is now prevented from interfering with the main launch of bass into the room.
The result is more accurate and far louder deep bass.
Carbon Passive Radiator
REL’s uniquely tuned passive radiators use special suspensions, now with an additional 30mm of linear travel, to produce performance far beyond conventional subwoofers.
Their new SuperProgressive™ passive radiator produces extremely long travel allowing for very loud output while retaining the variable stiffness of its suspension.
This allows it to act like a sealed box compact 12” design at low volume and a high output 14” design at its limit.
800 watts and Counting
At 800 watts the NextGen 5 amplifier is borrowed from their reference models and rocks huge reservoirs of power and current.
The 45% increase in power (previous version was 500 watts) is needed to deliver both the profound output levels needed for modern theatre, as well as to produce the deepest bass in a high end 2-channel system.
This increase in power is necessitated by REL’s development on the musical front of an all-new circuit termed PerfectFilter™ that balance both frequency extremes.
PerfectFilter performs two seemingly disparate qualities; extending the strong, even response of the extreme low end of bass frequencies while simultaneously opening up air and delicacy in the middle and high frequencies of one’s system.
Additionally, they applied customised PureTheatre™ filters to allow S/812 to deliver the most awe-inspiring theatre effects ever offered in a classic REL.
Stacked for Ultimate Performance
In the real world, bass occurs with width, depth and height.
By stacking up to three units per side (stereo or theatre main L-R speakers) the proper perspective and height of sonic events are illuminated.
This elevates reproduction from conventional stereo or theatre to a floor-to-ceiling panoramic, full scale perspective of each sonic event.
Reviewers are lining up to marvel at the transformation of music and film into the full-scale representation that REL Line Arrays uniquely deliver.
REL S/812 Specifications
Type – Front-firing active driver, down-firing passive
Active Driver Size & Material – 12 in. (300mm) long throw, Continuous CastAlloy™ cone structure, die cast alloy chassis
Passive Radiator Size & Material – 12 in. (300mm), Carbon/Carbon flat cone structure, steel chassis
Low Frequency Extension – -6dB at 19 Hz
Input Connectors – High Level Neutrik Speakon, Low Level (2) RCA, (1) LFE RCA, (1) LFE XLR
Output Connectors – High Level Neutrik Speakon, (1) LFE RCA or (1) LFE XLR
Power Output – 800 watts (RMS)
Amplifier Type – NextGen 5 Class D
Wireless Capability – REL AirShip II (sold separately)
Protection System
Fully Electronic Set Safe – Yes
D.C. Fault – Yes
Output Short – Yes
Mains Input Voltage – 220-240 volts, 110-120 volts for certain markets
Fuses – 5 Amp 220 volts operation, 9 Amp 120 volts operation
Dimensions
W x H x D – 17 x 17.5 x 20 in. (432 x 445 x 514 mm)
Net Weight – 75 lbs. (34 kg)
Finish – Piano Black Lacquer, Gloss White Lacquer 8 coats
Supplied Accessories
Mains Lead – Yes
Neutrik Speakon – Yes (10 Meters Nominal)
Users Manual – Yes
Reviews
There are no reviews yet.