Fyne Audio F1-8
MEET THE F1 SERIES
The F1 series represents the pinnacle of Fyne Audio’s long-standing audio experience and engineering expertise in the Hi-Fi industry.
This no-compromise series of high-end transducers hone cutting edge point source loudspeaker technology to define what is currently possible.
Designed, manufactured, hand finished and tested at Fyne’s HQ and manufacturing facility in Glasgow, the F1 series represents state of the art UK loudspeaker design.
The truly unique design and innovative feature list is second to none.
From the massive machined metal plinths to the intricate burr walnut inlay on the front and top of the wood finished cabinets, every element of F1 speakers has been meticulously considered to ensure stunning audio performance and exquisite aesthetic appeal for the audiophile.
ISOFLARE POINT SOURCE DRIVER
Fyne Audio’s signature IsoFlare driver is a point source system whereby the bass/midrange driver shares a common centre with the high frequency unit.
Providing outstanding stereo imaging even off axis, energy is radiated isotropically with constant directivity following the flare of the driver cone.
Sound is produced from a single point, giving truly spherical and time-aligned wave front.
This preserves the harmonic structure of complex instruments and vocals, recreating the true acoustic sound field from a loudspeaker that is far less dependent on room location.
For the flagship F1 series IsoFlare drivers, the high frequency unit features a highly rigid 3” titanium HF diaphragm for smooth and unstressed performance, with a massive Neodymium magnet incorporating a vented rear chamber to place low frequency resonance well below the crossover region.
This enables a very low 750Hz crossover point for the most realistic rendition of vocals.
The HF driver uses a high power handling edge wound aluminium voice coil on a Kapton former with pure copper shorting ring for lowest distortion.
It’s unique IsoFlare annular waveguide has computer optimised geometry to provide linear expansion into the room for the smoothest frequency response.
On the low frequency section, a multi-fibre paper cone gives natural sounding midrange and extremely clean transient behaviour even at concert realistic SPLs.
The twin roll fabric cone surround (floorstanding models) and FyneFlute surround (standmount models) effectively terminates cone energy without time-smearing, remaining cohesively integrated to the HF driver irrespective of listening volume.
The high power LF motor system uses a giant ferrite magnet with rectangular copper voice coil on aluminium former for class leading power handling.
The complete F1 series IsoFlare driver is built into a rigid cast aluminium chassis to eliminate unwanted vibrations and coupled to the cabinet’s internal bracing spars through a semi compliant bonding material for exceptional damping at the driver/cabinet interface.
BASSTRAX TRACTRIX DIFFUSER SYSTEM
The F1 series boasts Fyne Audio’s ultimate iteration of the patent pending BassTrax Tractrix profile LF diffuser system.
This complex yet refined approach to bass loading and reflex porting incorporates a twin cavity cabinet design with a tuned waveguide port firing downwards from the reinforced lower panel of the cabinet.
This loading technique broadens the tuning frequency to reduce cone excursion and acts as a damping system that blocks potential standing wave resonances produced by the main internal port between cavities.
The lower cavity bass port vents downwards onto the BassTrax Tractrix profile diffuser.
The unique, mathematically derived tractrix profile maintains a true 90 degree angle at each intersection of the expanding wavefront, so converts plain wave LF energy into a horizontally expanding spherical 360-degree wavefront with no loss of total energy.
The result is seamlessly uniform LF integration into the room and a loudspeaker that is far less critical of room positioning.
Tractrix profile wave-guides were originally applied to horn loudspeakers by Voight in the 1920’s but the application to an LF diffuser of this type is unique to Fyne Audio.
The F1 series crossover is a no-compromise design, hand built onto vibration damping fibreboard panels using the world’s finest electronic components and cables and fine tuned to deliver truly class-leading performance.
Leaning on decades of premium loudspeaker design experience, the design team refined the component list through finite element analysis, computer modelling, measurement and critical auditioning by Fyne’s top engineering and acoustic personnel.
The component roster includes low loss LF laminated core inductors, non-inductive thick film resistors and Claritycap’s highest grade HF polypropylene capacitors. Neotech ™ PC-OCC internal wiring provides highly transparent signal transfer, connecting to the loudspeaker cable through WBT Nextgen™ gold plated bi-wire terminals.
Once fully assembled and tested, every F1 crossover is Deep Cryogenically Treated.
This super freezing and slow thawing process relieves microstresses in components, wiring and solder joints, maximising signal transfer and delivering greater transparency to the sound.
Further F1 series refinements include a fifth earth terminal that grounds the driver chassis to prevent radio frequency interference effects from masking fine detail.
For seamless room integration, HF output controls are available on the front baffle of F1 series models, offering user adjustment of high frequency energy and presence
The Fyne Audio F1-8 loudspeaker distils the same technology and expertise utilised in its floorstanding siblings, into a smaller standmount format.
The hand crafted cabinet is supported on a machined aluminium plinth that houses Fyne’s state of the art BassTrax LF diffuser.
Surrounded by FyneFlute rubber surround, the F1-8 features a 200mm IsoFlare low frequency driver mated to a 25mm magnesium dome compression tweeter to create a point source, time aligned transducer delivering pure isotropic radiation across the entire audio spectrum.
Hand finished at Fyne Audio’s UK manufacturing facility in stunning real walnut veneer with burr walnut inlay, the F1-8 represents the pinnacle of Hi-Fi UK loudspeaker design in standmount speaker format.
Fyne Audio F1-8 Specifications
|System Type||2 way, downwards firing port, with BassTrax Tractrix diffuser*|
|Recommended amplifier power (Watt RMS)||30 – 180|
|Peak power handling (Watt)||360|
|Continuous power handling (Watt RMS)||90|
|Sensitivity (2.83 Volt @ 1m)||91dB|
|Nominal impedance||8 Ohm|
|Frequency response (-6dB typical in room)||33Hz – 34kHz|
|Drive unit complement||1 x 200mm IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround with 25mm magnesium dome compression tweeter, ferrite magnet system|
|Crossover type||Bi-wired passive low loss, 2nd order low pass, 1st order high pass. Deep Cryogenically Treated|
|System adjustments||Presence (2.5kHz – 5.0kHz) +/- 3dB|
|Dimensions – HxWxD||470 x 280 x 441mm (18.5 x 11.0 x 17.4”)|
|Weight – Each||15.2kg (33.5lbs)|
|Finishes||Piano Gloss Walnut|